- Broadcast recording quality on-camera microphone
- Matched pair 1⁄2” condenser capsules in XY stereo configuration
- Ultra lightweight, compact form factor
- On mic power and EQ controls
- Two step High Pass Filter (flat, 75Hz)
- Three position level control (-10dB, 0, +20dB)
- 9V battery powered - over 100 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 3.5mm stereo mini-jack output
- Billeted metal camera shoe mount with 3/8” thread for easy boompole mounting
- 10 year extended warranty when you register online at www.rodemic.com/warranty
Building on the success of the VideoMic Pro, the defacto standard for DSLR on-camera audio, and RØDE’s original Stereo VideoMic, the new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.
Based around a matched pair of high sensitivity ½”cardioid condenser capsules in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.
The Stereo VideoMic Pro builds on the feature set of the VideoMic Pro, with an ergonomic form factor perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The integrated shock mounting system provides superior isolation from vibration and mechanical noise that can otherwise degrade the recording quality. Additionally the lightweight yet robust multi-strand cable provides excellent acoustic decoupling from the camera and offers significantly lower noise transference than traditional audio cable.
The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.
A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.
Like the VideoMic Pro, the Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
The RØDE Stereo VideoMic Pro is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
|Acoustic Principle||Pressure Gradient|
|Active Electronics||JFET impedance converter|
|Frequency Range||40Hz - 20kHz|
|Maximum SPL||134dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Sensitivity||-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||20dB-A|
|Dimensions||130.00mmH x 66.00mmW x 108.00mmD|
|Warranty||1 year with free extension to 10 years following registration here|
|Quisque Rutrumos||Pellentesque habitant morbi tristique senectus et malesuada fames|
|Dehoncus||Faucibus orci luctus et ultrices|
|Destibulum Metus||Quisque rutrum rhoncus risus eget faucibus|
|Blandit Neques||Nam volutpat velit vitae felis pharetra ut destibulum|
Suspendisse tempor accumsan consectetur. Praesent sed adipiscing urna. Ut dignissim sodales mauris eget elementum. Sed at eros ipsum. Suspendisse lacinia, metus in sodales sodales, massa nisi congue neque, vel dictum magna orci commodo turpis. Cras sit amet blandit nulla. Quisque sollicitudin, felis ac pretium euismod loremous ligula condimentum sem, eget rutrum nulla urna in dui. Duis ornare mattis tortor nec mattis diam ultrices non.
Sed ullamcorper placerat turpis at dapibus. Nulla ut mi sed turpis semper molestie. Aenean a felis id augue convallis feugiat. Suspendisse a eros tempor, tincidunt massa a, mollis eros. Curabitur nisl dui, volutpat ac magna id, scelerisque ultricies purus. Donec in metus sit amet risus feugiat lacinia non quis ante. Integer in euismod urna. Donec imperdiet posuere leo, a porttitor nulla ullamcorper non.